Compatible with the MyRacesLive Streaming Kit Version 2.0.

Antenna Specifications:

Works with 698–2170 MHz 5G and 4G/LTE frequencies.
Supports all frequencies utilized by major carriers in North America

Permanent Mount (through-hole)

Non-magnetic option (NMO) for permanent, secure installation on your vehicle’s roof.
0.75″ (19 mm) NMO mount affixed to 14′ (4.27 m) of black RG58 cable, terminating in an SMA-male connector.
Requires drilling a ¾-inch hole in the vehicle's roof and pulling/concealing cable through the vehicle’s interior (check out this tutorial video).

Rooftop 4G antenna with permanent mount

$50.00

Quantity

In this In-Car Live Streaming Kit, you'll find :

1x modified MiNE Media A5 Streaming Camera with
- new external SMA connectors (1 per sim card)
- its USB-C charging cable and getting-started guide
2x 4G/LTE L-shaped indoor antennas to increase cell signal reception.
1x Roll Bar Mount (see product picture)
1x Male Ball Adapter
1x RAM Mount Double Socket Arm (Small Size)
1x External Lavalier Microphone
1x Neon Blue Protective Case

For Outdoor/Rooftop antenna options: check the "Rooftop Antenna Options" tab.

To keep the camera charged during the entire race, use a power supply from the car and the camera's 2AMP USB-C port. Alternatively, you can use an external power bank and a power bank mount.

Remember to purchase a SIM card (nano size) and data plan subscription from your favorite Service Provider. If you need a Verizon SIM Card, we can ship one as part of the kit (simply select the "Add Verizon SIM Card" Yes option). You can then set up a data plan subscription with Verizon by going to their store or calling our Verizon partner/reseller Eric Kaul (the less frustrating option).

Name	Network Bonding Streaming Camera
OpticalParameters	Sensor type	SONY CMOS
	Sensor size	1/2.8 inch
	Effective pixels	8 mega pixels
	Camera angle	opposite angle 118.5 degreesl; Horizontal 110.5 degrees;Vertical 76.3 degrees
	Focal length	1.98mm
	Lens work object distance	Prime lens, 1m to ∞
ScreenParameters	Screen size	3 inch
	Screen characteristics	Touch-screen
NetworkInterface	4G Built-in	Built-in 2*4G SIM, LTE(FDD/TDD)
	WiFi	2.4G/5.8G
	Protocol	RTMPS/SRT
VideoParameters	Video compression standard	H.265/H.264
	Encoding type	H.265 Main profile/ H.264 High profile / Mainprofile / Base line
	Maximum resolution	3840x2160P
	FPS	4K: 25/30 fps ; 1080P: 25/30/50/60 fps
	Birate	32000 ~ 20000 kbps Adjustable code rate, which can be set according to the scene
AudioParameters	Audio compression standard	AAC
	Audio sampling rate	44.1K/48K
	Audio input	Built-in two-channel microphone
	Audio play	Built-in speaker
Storage	Flash memory	TF card ( max 256G )
	Video format	MP4 (H.265/H.264+ AAC)
	File system	FAT 32; exFAT
M Live App	Operate OS	Android/iOS
Externalinterfaces	Charging port	Type-C
	Earphone monitoring	3.5mm
	External audio input	3.5mm
	micro HDMI	Video output
	USB A	External USB dongle/USB network card option
Generic Specification	Working temperature and humidity	0℃ ~ 40℃, Humidity less than 95% (no condensation)
	Power supply	DC 5V ± 10%, 8000mAh Battery capacity
	Maximum power consumption	8W
	Dimension	130mm60mm80mm
	Weight	400g

Antenna Specifications:

Works with 698–2170 MHz 5G and 4G/LTE frequencies.
Supports all frequencies utilized by major carriers in North America

Option 1: Permanent Mount (through-hole) - $50

Non-magnetic option (NMO) for permanent, secure installation on your vehicle’s roof.
0.75″ (19 mm) NMO mount affixed to 14′ (4.27 m) of black RG58 cable, terminating in an SMA-male connector.
Requires drilling a ¾-inch hole in the vehicle's roof and pulling/concealing cable through the vehicle’s interior (check out this tutorial video).

Option 2: Magnetic Socket - $70

Black zinc magnet housing
Soft rubber boot on the magnet for scratch protection
17 ft. RG58A/U cable with bare copper braid 95% and solid insulation & copper center conductor
Requires a metallic rooftop and the ability to run the cable from inside to outside the car.